Leader-mw | Introduction to ANT0123 400-6000Mhz Log Periodic Antenna: |
The ANT0123 is a high-performance Log Periodic Antenna engineered for precision measurements across an ultra-wide frequency spectrum from 400 MHz to 6000 MHz (6 GHz). Its primary application is in professional field strength measurement, making it an indispensable tool for EMI/EMC pre-compliance testing, spectrum analysis, and RF site surveys where accurate assessment of radiated emissions is critical.
A key feature of this antenna is its capability for determining signal polarization. The design inherently provides linear polarization, allowing technicians to characterize whether an unknown signal is vertically, horizontally, or elliptically polarized by rotating the antenna and observing the variation in measured field strength. This is vital for understanding signal sources and optimizing communication links.
The antenna offers consistent gain, a directional radiation pattern for improved front-to-back ratio, and low VSWR across its entire bandwidth. This combination of wideband coverage, polarization analysis, and reliable performance makes the ANT0123 a trusted instrument for telecommunications engineers, EMC test labs, and regulatory compliance professionals.
Leader-mw | Specification |
ANT00123 400-6000Mhz Log Periodic Antenna
No. | Parameter | Minimum | Typical | Maximum | Units |
1 | Frequency range |
0.4 |
- |
6 |
GHz |
2 | Gain |
6 |
dBi |
||
3 | Polarization |
vertical polarization |
|||
4 | 3dB Beam width, E-Plane |
70 |
˚ degree | ||
5 | 3dB Beam width, H-Plane |
40 |
˚ degree | ||
6 | VSWR |
- |
2.0 |
- |
|
7 | Power |
50 |
W(CW) |
||
8 | weight |
1.17kg |
|||
9 | Outline: |
446×351×90(mm) |
|||
10 | Impedance |
50 |
Ω |
||
11 | Connecter |
N-K |
|||
12 | surface | Gray |
Leader-mw | Environmental Specifications |
Operational Temperature | -45ºC~+55ºC |
Storage Temperature | -50ºC~+105ºC |
Humidity | 100% RH at 35ºc, 95%RH at 40ºc |
Leader-mw | Outline Drawing |
Outline Drawing:
All Dimensions in mm
Outline Tolerances ± 0.5(0.02)
Mounting Holes Tolerances ±0.2(0.008)
All Connectors:N-Female
Leader-mw | Gain and VSWR |
Leader-mw | 3dB Beamwidth |
Leader-mw | Mag-pattern |